AQUAROBOT TURBI set of automatics with 5L pressure tank

AQUAROBOT TURBI set of automatics with 5L pressure tank

AQUAROBOT TURBI set of automatics with 5L pressure tank

AQUAROBOT TURBI set of automatics with automatic control unit and 5L pressure tank is designed for automatic on/off control of 1.5 kW single-phase surface and submersible (including vibration) pumps as well as for pump dry running protection.

Functional capabilities

  1. Automatically switches the pump on when system flow rate is not more than 2 l/min.
  2. Switches the pump off with a fifteen-minute delay in case of water flow failure or the rate thereof drops to 2 l/min.
  3. Protects the pump against dry running operation.
  4. Provides the pump on/off when the system voltage drops to 170V.
Specifications
  • System parameters: ~220V, 50Hz
  • Pump power: up to 1.5kW
  • Load current: not more than 10
  • Maximum allowable system pressure: 0.6 MPa (6 bar). It is allowed to use the device in pressure boosting systems if system total pressure is not more than 6 bar.
  • Min sensibility of flow sensor: 2 l/min.
  • Max allowable water flow: 100 l/min.
  • Allowable range of water temperatures: +5 +35, at ambient temperature +1- +40.
  • Requirements to pumped fluid: clean water without abrasive particles and fibrous inclusions; max size of impurities 1mm.
  • Connecting dimensions: 1" external thread 1" external thread.
  • Protection class: IP65.


Trademark: UNIPUMP
Manufacturer: UNIPUMP
Warranty:  24 months


All section equipment: Automatics for systems


← Back to section